Robco offers every type of rubber material for sealing, impact protection, vibration resistance and various other applications. An almost infinite selection of rubber types and blends in various densities and durometers is available to manufacture pads, protective liners, belt wipers, skirts, flooring, various linings, impact and vibration protection and so much more…

Our engineered and bulk rubber products can be found in the petrochemical, pulp and paper, power generation, mining, metal processing, chemical processing and marine industries. We also provide FDA compliant rubbers for food and beverage, pharmaceutical and water treatment applications.

Robco employs a team of full-time engineers to answer all your questions and guide you through the selection process to determine the right compound and properties for your application.

 

Scroll down to browse our rubber products or select from the categories below:


RUBBER MATERIALS

 

We provide our rubber materials in rolls (or sheets), cut lengths, gaskets and die-cut forms as per your drawing and specifications.

 

ROBCO 423-SBR-CI 435F Red Rubber 460 Natural Gum
  464 Black SBR 465 Neoprene 466 Neoprene
  467 Neoprene 602 Neoprene 1523 Sponge
  2919 Coated Polyester 5700 Neoprene/Nylon 5717 Neoprene/Polyester
  9370 White Nitrile 9863 Nitrile EP-60 EPDM
  EPP-60 Cured EPDM Fairprene Microcellular Urethane
  SC-41 Soft Density SC-42 Medium Density SC-43 Firm Density
  SI-60 Silicone VI-75 Viton® White Silicone

 

RUBBER PRODUCTS

 

Robco manufactures and supplies rubber components, parts, tubing, extrusions and custom-made.

ROBCO Anti-Vibration Mounts RTJ Flange Saver Rubber Gate Seals
  Rubber Mats Rubber Parts Rubber Tubing

 

Robco 435F

Red Rubber

435F red rubber gasket  
Temperature Range
Compression Set
Specific Gravity
-22ºF - 180ºF 50% max. 112 lb/ft³
Max. Hardness
Tensile Strength
Elongation
75 Duro NA 100% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
±15 points Max. ±30% Max. -50% max.
Applications:
Low cost material for basic applications
 
Robco 435 red rubber is an SBR-based fabric-fi nished, composition rubber sheet. A general purpose plant maintenance material recommended for air, hot or cold water and low pressure saturated steam applications.      
water applicationsozone applicationshydrocarbs applicationsuv applications Roll width36W x 48"W Available thicknesses1/16" - 1/4"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco 460

Black SBR

460 pure gum rubber gasket  
Temperature Range
Compression Set
Specific Gravity
-22ºF - 185ºF 50% max. 66 lb/ft³
Max. Hardness
Tensile Strength
Elongation
40 Duro 2500 psi min. 400% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
±15 points Max. ±30% Max. -50% max.
Applications:
High resiliency at low temperature
 
Robco 460 Pure Gum, or natural rubber, has superior resistance to tear and abrasion, exibility at low temperatures, high tensile strength and excellent resiliency. Applications include chute linings, low temperature belting, cemented sleeves, etc.      
water applications

Roll width48"W
Available thicknesses1/16" - 1/2"

  Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco 464

Natural Pure Gum Rubber

464 SBR gasket  
Temperature Range
Compression Set
Specific Gravity
-22ºF - 180ºF 80% max. NA
Max. Hardness
Tensile Strength
Elongation
60 Duro 500 psi min. 300% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
NA NA NA
Applications:
Low cost general purpose
 
Robco 464 is a general purpose SBR sheet with good abrasion resistance, impact strength, resilience and exibility at low temperatures. Suitable for scrapers, conveyor skirtboards, blast mats and other abrasive applications.      
water applicationsozone applicationsuv applications Roll width48"W
Available thicknesses1/16" - 1/2"
  Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco 465

Polychloroprene (Neoprene) - 50 Duro

465 Neoprene gasket  
Temperature Range
Compression Set
Specific Gravity
-22ºF - 200ºF 80% max. 77 lb/ft³
Max. Hardness
Tensile Strength
Elongation
50 Duro 1000 psi min. 300% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
±15 points Max. ±15% Max. -50% Max.
Applications:
First choice for moderate applications
 
Good inherent resistance to fungus, flame, weather, ozone and natural aging; moderate resistance to oil and gasoline; good resistance to alkalis and acids. Applications include gaskets and washers for industrial processes and seals for doors and windows.      
Chemical applicationsoil applicationsOxygen applicationswater applicationsSteam applicationshydrocarbs applications Roll width48"W
Available thicknesses1/16" - 1/4"
  Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco 466

Polychloroprene (Neoprene) - 60 Duro

466 Neoprene gasket  
Temperature Range
Compression Set
Specific Gravity
-22ºF - 200ºF 80% max. 82 lb/ft³
Max. Hardness
Tensile Strength
Elongation
60 Duro 1000 psi min. 300% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
±15 points Max. ±30% Max. -50% Max.
Applications:
First choice for moderate applications
 
Good inherent resistance to fungus, flame, weather, ozone and natural aging; moderate resistance to oil and gasoline; good resistance to alkalis and acids. Applications include gaskets and washers for industrial processes and seals for doors and windows.      
water applicationsacid applicationsalkalis applicationsozone applications Roll width48"W
Available thicknesses1/32" - 1"
  Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco 467

Polychloroprene (Neoprene) - 70 Duro

467 Neoprene gasket  
Temperature Range
Compression Set
Specific Gravity
-22ºF - 200ºF 80% max. 82 lb/ft³
Max. Hardness
Tensile Strength
Elongation
70 Duro 1000 psi min. 200% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
±15 points Max. ±30% Max. -50% Max.
Applications:
First choice for moderate applications
 
Good inherent resistance to fungus, fl ame, weather, ozone and natural aging; moderate resistance to oil and gasoline; good resistance to alkalis and acids. Applications include gaskets and washers for industrial processes and seals for doors and windows.      
water applicationsacid applicationsalkalis applicationsozone applications Roll width48"W
Available thicknesses1/16" - 1/4"
  Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco 9370

White Nitrile

9370 nitrile gasket  
Temperature Range
Compression Set
Specific Gravity
-40ºF - 200ºF 50% max. 87 lb/ft³
Max. Hardness
Tensile Strength
Elongation
60 Duro 1000 psi min. 300% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
±15 points Max. ±30% Max. -50% Max.
Applications:
Meets FDA requirements for common applications
 
Robco 9370 is a powder-free white nitrile that has excellent resistance to petroleum-based hydraulic uids and good resistance to acids and alkalis. This FDA grade material is recommended for service in pharmaceuticals, food industry and other purity sensitive applications.      
water applicationsacid applicationsalkalis applicationshydrocarbs applicationsFood applicationspharmaceutical applications Roll width48"W
Available thicknesses1/16" - 1/4"
  Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco 9863

Nitrile

9863 nitrile gasket  
Temperature Range
Compression Set
Specific Gravity
-40ºF - 200ºF 25% max. 72 lb/ft³
Max. Hardness
Tensile Strength
Elongation
60 Duro 2500 psi min. 350% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
±15 points Max. ±30% Max. -50% Max.
Applications:
First choice for contact with hydrocarbons
 
Robco 9863 Nitrile has very good resistance to oil and gasoline; superior resistance to petroleum-based hydraulic uids; good resistance to hydrocarbon solvents; good resistance to alkalis and acids. Ideal for applications where oil resistance is imperative.      
water applicationsacid applicationsalkalis applicationshydrocarbs applications Roll width48"W
Available thicknesses1/16" - 1/4"
  Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco EP-60

EPDM

EP-60 EPDM gasket  
Temperature Range
Compression Set
Specific Gravity
-40ºF - 250ºF 50% max. 75 lb/ft³
Max. Hardness
Tensile Strength
Elongation
60 Duro 800 psi min. 300% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
±10 points Max. ±25% Max. -25% Max.
Applications:
Good acid and weather resistance
 
Excellent resistance to heat, ozone, sunlight. Good low temperature exibility; superior resistance to water and steam; good resistance to alkalis, acids and oxygenated solvents. Besides gaskets, applications include any type of weather stripping. Avoid contact with hydrocarbon fl uids.      
water applicationsacid applicationsalkalis applicationshydrocarbs applicationsuv applications Roll width48"W
Available thicknesses1/16" - 1/4"
  Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco EPP-60

Peroxide-Cured EPDM

EPP-60 EPDM gasket  
Temperature Range
Compression Set
Specific Gravity
-55ºF - 250ºF NA NA
Max. Hardness
Tensile Strength
Elongation
60 Duro 1800 psi min. 400% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
NA NA NA
Applications:
Acid resistant
 
Robco EPP-60 peroxide-cured EPDM is an economical alternative to Viton®, PTFE and silicone in certain applications involving chemicals at elevated temperatures.      
water applicationsacid applicationsalkalis applications Roll width36 - 48"W
Available thicknesses1/16" - 1/4"
  Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco SI-60

Grey/Red/White Silicone

SI-60 silicone gasket  
Temperature Range
Compression Set
Specific Gravity
-80ºF - 450ºF 80 ppi 90.5 lb/ft³
Max. Hardness
Tensile Strength
Elongation
60 Duro 600 psi min. 300% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
NA NA NA
Applications:
Soft material for high temperature applications
 
Ideal where low bolt load is necessary and high temperature resistance is required. Resistant to moderate chemicals, ozone, UV. Also available in FDA grade material for high temperature food and pharmaceutical applications.      
water applicationsozone applicationsoxidation applicationshydrocarbs applicationsuv applications Roll width36"W
Available thicknesses1/16" - 1/4"
  Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco VI-75

Viton®

VI-75 Viton gasket  
Temperature Range
Compression Set
Specific Gravity
-13ºF - 392ºF NA 120 lb/ft³
Max. Hardness
Tensile Strength
Elongation
75 Duro 1200 psi min. 250% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
NA NA NA
Applications:
Soft resilient material with high chemical resistance
 
Robco VI-75 Viton is made from 100% Dupont Performance Elastomer FKM polymer. Resistant to all aromatic, aliphatic and halogenated hydrocarbons plus many acids as well as animal and vegetable oils.      
water applicationsozone applicationsoxidation applicationshydrocarbs applicationsuv applications Roll width36"W
Available thicknesses1/32" - 1/4"
  Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco 423-SBR-CI

Cloth Inserted

423-SBR-CI gasket  
Temperature Range
Compression Set
Specific Gravity
-20ºF - 180ºF 50% max. 94 lb/ft³
Max. Hardness
Tensile Strength
Elongation
80 Duro 500 psi min. 100% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
±15 points Max. ±30% Max. -50% Max.
Applications:
General purpose / high tensile
 
Robco 423 CI standard cloth inserted sheet is made from SBR reinforced with polyester fabric. More tear resistant than homogenous rubber, Robco 423 CI is suitable for low pressure saturated steam, hot or cold water, air and gas applications.      
water applicationsoxidation applicationsuv applications Roll width36 - 48"W
Available thicknesses1/16" - 1/4"
  Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco 2919

Neoprene Coated Polyester

2919 neoprene coated gasket  
Temperature Range
Compression Set
Specific Gravity
-40ºF - NA 40 - 90 lbs 11 lb/ft³
Max. Hardness
Break. Strength
Elongation
NA 360 - 640 lbs 100% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
NA NA NA
Applications:
For fabrication purposes
 
A very thin, lightweight material used to make protective boots/bellows and protective covers. Robco 2919 makes a far more durable cover than any other type of weather resistant product.      
water applicationsozone applicationsacid applicationsalkalis applications Roll width60"W
Available thicknesses0.020" min.
  Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco 5700

Neoprene & Nylon Diaphram

5700 Neo Nylon gasket  
Temperature Range
Compression Set
Specific Gravity
-31ºF - 212ºF 35% max. 88 lb/ft³
Max. Hardness
Tensile Strength
Elongation
70 Duro 1400 psi min. 250% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
±15 points Max. ±15% Max. -40% Max.
Applications:
Premium diaphragm Material
 
A premium quality sheet made from high grade neoprene reinforced with nylon fabric. Robco 5700 is recommended for use where neoprene's physical and chemical properties in combination with nylon's strength are required.      
water applicationsozone applicationsacid applicationsalkalis applications Roll width54"W
Available thicknesses1/16" - 1/4"
  Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco 5717

Neoprene & Polyester Diaphragm

5700 neoprene polyester gasket  
Temperature Range
Compression Set
Specific Gravity
-22ºF - 212ºF 35% max. 97 lb/ft³
Max. Hardness
Tensile Strength
Elongation
70 Duro 1400 psi min. 250% min.
Heat Aging: Hardness
Heat Aging: Tensile
Heat Aging: Elongation
±15 points Max. ±15% Max. -40% Max.
Applications:
Economical diaphragm
 
Made from high grade neoprene reinforced with polyester fabric. A superior quality diaphragm material with high burst strength and flexibility. Recommended for applications that require the exibility of polyester and good oil resistance.      
water applicationsozone applicationsacid applicationsalkalis applications Roll width48"W
Available thicknesses1/16" - 1/4"
  Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco 602

Closed-Cell Neoprene Sponge

602 neoprene sponge gasket  
Temperature Range
Compression Set
Density
-40ºF - 150ºF 25% max. 7-11 lb/ft³
Tear Strength
Tensile Strength
Elongation
14 lb/in 90 psi min. 150% min.
Heat Aging: CD
Comp. Deflection @25%
Water absortion
±30 points Max. 5psi Min.-9psi Max. 5% Max.
Applications:
For gaskets, stripping, sound and vibration damping
 
Soft density neoprene, closed-cell sponge material for gaskets, weather stripping as well as sound and vibration damping. This product is available in extruded profi les, sheet or strips with or without pressure sensitive adhesive (PSA) backing.      
water applicationsozone applicationsacid applicationsoxidation applicationsalkalis applications Roll width54"W
Available thicknesses1/8" - 1"
  Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco 1523

General Purpose Open-Cell Sponge

1523 sponge gasket  
Temperature Range
Compression Set
Density
-20ºF - 160ºF 15% max. 26 lb/ft³
Max.Hardness
Tensile Strength
Elongation
45 Duro ±10 NA NA
Heat Aging: CD
Comp. Deflection @25%
Water absortion
±20 5psi Min.-10psi Max. NA
Applications:
Excellent abrasion resistance and compressibility properties
 
A natural open-cell sponge rubber with excellent abrasion resistance, compressibility and good dry sealing properties. Readily absorbs liquids and gases. Available in sheets, strips or die cut parts with or without adhesive backing.      
water applications Roll width48"W
Available thicknesses1/8" - 1"
  Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco SC-41

Soft Density, Closed-Cell Sponge

CS-41 sponge gasket  
Temperature Range
Compression Set
Density
-20ºF - 180ºF 25% max. 3.5 - 5.0 lb/ft³
Tear Strength
Tensile Strength
Elongation
10 lb/in 50 psi min. 75% min.
Heat Aging: CD
Comp. Deflection @25%
Water absortion
NA 2 psi Min. - 5 psi NA
Applications:
Appropriate for automotive, truck and appliance gasketing
 
SC-41 is a PVC/NBR/Neoprene elastomeric sponge with moderate compression-defl ection and ne cell structure. Meets required speci cations for automotive, truck and appliance gasketing applications. Available with Pressure Sensitive Adhesives (PSA).      
water applicationsozone applicationsuv applications Roll width54"W
Available thicknesses1/8" - 1"
  Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco SC-42

Medium density, Closed-Cell Sponge

SC-42 sponge gasket  
Temperature Range
Compression Set
Density
-20ºF - 180ºF 25% max. 6-8 lb/ft³
Tear Strength
Tensile Strength
Elongation
15 lb/in 75 psi min. 100% min.
Heat Aging: CD
Comp. Deflection @25%
Water absortion
NA. NA NA
Applications:
For gaskets, stripping, sound and vibration damping
 
SC-42 is a PVC/NBR/Neoprene elastomeric sponge material, ideal for gaskets, weather stripping as well as sound and vibration damping. Available in extruded profi les, sheet or strips with or without pressure sensitive adhesive (PSA) backing.      
water applicationsozone applicationsuv applications Roll width48"W
Available thicknesses1/8" - 1"
  Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco SC-43

Firm density, Closed-Cell Sponge

SC-43 sponge gasket  
Temperature Range
Compression Set
Density
-40ºF - 200ºF 30% max. 9 lb/ft³
Max Hardness
Tensile Strength
Elongation
60 Duro 71 psi min. 150% min.
Heat Aging: CD
Comp. Deflection @25%
Water absortion
±30 9psi Min.-13psi Max. 5% Max.
Applications:
For gaskets, stripping, sound and vibration damping
 
SC-43 is a PVC/NBR/Neoprene elastomeric sponge material, suitable for gaskets, weather stripping as well as sound and vibration damping. Available in extruded pro les, sheet or strips with or without pressure sensitive adhesive (PSA) backing.      
water applicationsozone applicationsuv applications Sheet size72L x 42"W Available thicknesses1/8" - 1"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco White Silicone

Stability at high temperatures

White silicone gasket  
Temperature Range
Compression Set
Density
-67ºF - 500ºF 25% max. 0.02 lb/ft³
Max Hardness
Tensile Strength
Elongation
NA 90 psi min. 200% min.
Heat Aging: CD
Comp. Deflection @25%
Water absortion
NA 6psi Min.-14psi Max. 5% Max.
Applications:
Pro le extrusions, sheeting, jointed rings, punched forms
 
Premium quality material used where highly compressible gaskets are required at temperatures up to 500ºF. The cellular structure is produced without the use of CFCs resulting in less damage to the environment.      
water applicationsozone applicationsoxidation applicationsuv applicationshydrocarbs applications 36L x 24"W 1/16" - 1/2"   Material Safety Data Sheet Technical Data Sheet Request Quote  

Robco Microcellular Urethane

Superior Foam/Sponge

Microcellular Urethane gasket  
Temperature Range
Compression Set
Density
-40ºF - 158ºF 2% max. 17 lb/ft³
Max Hardness
Tensile Strength
Elongation
7 Duro 50 psi min. 80%
Heat Aging: CD
Comp. Deflection @25%
Water absortion
NA NA NA
Applications:
Perfect choice for vibration & impact damping
 
Off¬ers enhanced recovery over other types of foam and sponge, resulting in a superior seal, particularly in low seat stress applications. This material exhibits resistance to UV exposure, ozone and is environmentally safe and clean. An excellent choice for seals, gaskets and spacers used in electronic equipment.      
water applicationsozone applicationsoxidation applicationsuv applicationshydrocarbs applications Roll width54"W
Available thicknesses1/32" - 1/2"
  Material Safety Data Sheet Technical Data Sheet Request Quote  

Rubber Mats

Mats for Industrial, Commercial, Food
Service, Static and Electrical Applications

Rubber mats   Runner matting, Link mats, Anti-fatigue mats, Protective floor matting  
Our rubber sheeting can be cut and manufactured as floor and surface matting speci c to your application with machined groves, holes, patterns, etc. per your speci cations.      
      Contact us for details   Request Quote  

Rubber Parts

Grommets, O-Rings, Washers

Small rubber parts      
We manufacture small rubber parts such as grommets, o-rings, rubber bands, suction cups, bumpers, bushings, washers, stoppers, and plugs to suit your needs.      
      Contact us for details   Request Quote  

Rubber Tubing

Sleeves, Cords, Strips, Pro les and more...

Tubing      
Tubing, cord and profi le parts can be ordered from our wide range of specialized rubber materials such as EPDM, Viton, NBR, Nitrile, Silicone, Neoprene and so much more...      
      Contact us for details   Request Quote  

Rubber Gate Seals

Any Size, Any Shape, Anywhere!

Rubber gate seals  

• Typical Seal Applications Including:

• “J” Seal Strips (90 deg Corners)

• “J” Seal Transition Corners

• “J” Seal Corners – Bulb-To-Bulb

• “J” Seal To Wedge Seal Transition

• Molded instead of Extruded Solid or Hollow

• Metal Clad Seals

• Fabric Reinforced Seals

• Fluorocarbon Clad Seal
Applications:
Hydro and sewage applications, gates, bulkheads, valves, deflection
 
 
 
Robco manufactures, supplies and vulcanizes a complete range of Gate Seal products. Specific to your you needs and application.      
water applicationssewage applications     Material Safety Data Sheet Technical Data Sheet Request Quote  

RTJ Flange Saver

Closed-Cell PVC/NBR/CR Foam

Rtj flange saver  
Temperature Range
Compression Set
Density
-40ºF - 150ºF 25% Max. 5.5 - 7.5 lb/ft³
C-Tear Strength
Tensile Strength
Elongation
15 lb/in 75 psi Min. 100% Min.
Comp Deflection@25% Water Absorption Water Absorption
5psi min. - 9psi Max. 10% Max. 0.10 lb/ft³ of cut surface
Applications:
For gaskets, stripping, sound and vibration damping
 
The Ring Joint Flange Saver is specifically designed to provide excellent weather resistance and corrosion protection for all ring joint flange faces in demanding applications. This precision seal uses closed-cell PVC/NBR/CR foam with high compression-deflection and fine cell structure to seal excess space between ring joint flanges once in service.      
water applicationspetroleum applications     Material Safety Data Sheet Technical Data Sheet Request Quote  
               

Fairprene

Nylon or Cotton Fabric, Coated with Nitrile or Neoprene

Fairprene  

Type / Material

Breaking Strength

Mullins Burst

Thickness

BN-0002 Nylon/Nitrile

250 x 250 lbs

450 psi

0.025 – 0.05

BN-5027 Nylon/Nitrile

25 x 25 lbs

75 psi

0.006–0.013

BN-5029 Nylon/Nitrile

65 x 60 lbs

135 psi

0.013–0.017

BN-5039 Nylon/Nitrile

300 x 300 lbs

600 psi

0.025-0.05

BN-5049 Nylon/Nitrile

65 x 60 lbs

125 psi

-

NC-5051 Cotton/Neoprene

250 x 170 lbs

300 psi

0.035-0.05

NN-5009 Nylon/Neoprene

75 x 75 lbs

125 psi

0.013

NN-5798 Nylon/Neoprene

250 x 250 lbs

475 psi

0.025-0.005

 
Fairprene is a coated fabric, which has a nominal temperature range or -40ºF to 200ºF with Neoprene Coating and -65ºF to 200ºF with Nitrile Coating. Typically used as high strength diaphragm material. This product offers good resistance to oil, fuel, aromatic and aliphatic hydrocarbons.      
oil applicationshydrocarbs applications     Material Safety Data Sheet Technical Data Sheet Request Quote  

Anti-Vibration Mounts

To reduce wear and down-time on machine parts.

Anti-vibration mounts  
Hardness A Hardness B
Material
40º IRH 60º IRH Natural Rubber

 

Types:

C, U, SE, RA, RAEM, H, M, BA, DA, SAW, TF, VT, TK, HK, ANB Bumpers, Bobbins, BL Support Bearing, GK, Vibration Plate, VP Sleeves, R/KL Pipe Support
 
Anti-Vibration mounts have specially compounded rubber cushioning elements which naturally absorb sound and motion better than cork or felt and steel vibration dampers.      
      Material Safety Data Sheet Technical Data Sheet Request Quote  

 

Go to top